Part No.: MagPad-5
Length = 75 mm
Width = 39 mm
Thickness = 6 mm
Pull Force: 4 kg
Shear Force: 2 kg
Hole Centres: 65 mm
Magnet material: Rubber covered ferrite magnets and Galvanized steel
Magnet coating: Nickel (ni-cu-ni) or Zinc (zn)
Max. work temperature: +120℃
Through Hole Magnetic Pad MagPad-5
Part No.: MagPad-5
MagPad-5 Through Hole Magnetic Pad, Car Roof Signs Mounting Magnet, Driver Taxi Sign Rubber Covered Magnetic Mounting Pad, Throuh Hole Magnetic Holding Pads, Plate Holder Magnet China Manufacturer
Through Hole Magnetic Pad Part No. MagPad-5 by HSMAG Features :
Magnetised with a six-pole striped magnetic field on the magnetic pad
Form: Rubber covered magnets | zinc plated
Material: Ferrite magnets assembled on to a mild steel backing plate with a protective rubber coating over the magnets.
Ferrite Grade Y30BH / Y35 / Y33 …
Housing Galvanized steel
Rubber coated to increase friction and reduce corrosion
Suitable for use with Taxi Signs, Adverting Signs and Driving School signs
Magnetic Mounting Pad with through hole has one large rectangular bar magnet on its base.
This magnet has only one magnetic face, magnetised in the form of a multi-pole magnet.
This is where the magnetic face is magnetised in a striped pattern of alternating north and south poles e.g. north, south, north, south.
The through hole magnetic mounting pad requires multi-pole magnetisation due to the steel back plate preventing the magnetic field from escaping through the top of the magnetic mounting pad. Only one half the magnetic mounting pad needs to be magnetised so that it can attach to a ferromagnetic material. The other side is used to hold the sign with the help of the through holes.
Magpads have been developed to provide a range of handy and powerful limpet magnets with a soft contact base to minimize the possibility of damage to paintwork, particularly when applying and removing the Magpad. All Magpads have a multipole magnet circuit to give the combination of good pull-off as well as sideways/shear resistance. The magnets are encapsulated in a polyurethane compound which provides a soft contact surface. The metal top of the Magpad is zinc plated for corrosion resistance. Magpads come in a variety of sizes with various stud and screw hole mounts as detailed.
|Part No.||Length mm||Width mm||Thickness mm||Force kg||Shear force kg||Hole Centres mm|
|Part No.||Length mm||Width mm||Thickness mm||Force kg||Shear force kg||Thread MxL|
Typical uses: include lighting systems, magnetic brackets, car roof signs (e.g. taxi signs), antenna clamp systems, lighting fixtures, security gates, vehicle tracking units, temporary signage, adverting signs, driving school signs, attaching to boards and pictures to metal partitions, door clamps, etc.