Material: Neodymium (NdFeB ) and Steel
Part No.: HS-NO-10
Plating / Coating: Nickel (Ni-Cu-Ni) or Zinc (Zn)
Shape: Flat / without bore
Pot Magnet Size:
Pot Total Diameter (D): 10 mm
Pot Total Height (H): 5 mm
Tolerance: ±0.1 mm
Weight: 4 g
Holding Force: 1.5 kg
Maximum Operation Temperature: 80 °C
Delivery Time: 7-15 days
Small Flat Pot Magnet Neodymium Ø 10 X 5 mm
Product Description
Small Flat Pot Magnet Neodymium Ø 10 X 5 mm, NdFeB Pot Magnets, Ø 10mm Strong Neodymium Pot Magnet, Small NdFeB Flat Pots
10mm Dia Small Flat Pot Magnet – NdFeB Pot Magnets are best for small sized magnetic products with maximum pull strength (ideally when in direct contact with ferromagnetic e.g. mild steel surfaces). The actual pull force achieved is dependent on the surface that is being clamped onto (material type, thickness, flatness, friction levels, etc), its quality (e.g. rust free), its size (thickness plus total surface area), etc.
We offer Pot Magnets in a silver (chrome, zinc or nickel) finish, a white paint finish, a red paint finish, black rubber coated finish and ferritic stainless steel finish, etc.
We currently offer four types of Pot Magnet that contain NdFeB magnets:-
● NdFeB Pot Magnet with Male Threaded
● NdFeB Pot Magnet with Female Threaded
● NdFeB Pot Magnet with Countersunk Mounting (Shallow Pot)
● NdFeB Pot Magnet with Through Hole Mounting
Application:
There are many applications for NdFeB Pot Magnets, mainly in applications where a strong clamping force is required.
Part No. | Dimension (mm) | Weight | Holding Force | |
D | H | (g) | (Kg) | |
HS-NO6 | 6 | 4.7 | 2 | 0.5 |
HS-NO8 | 8 | 4.7 | 3 | 1 |
HS-NO10 | 10 | 5 | 4 | 1.5 |
HS-NO12 | 12 | 5 | 5 | 2 |
HS-NO14 | 14 | 4.5 | 7 | 5 |
HS-NO16 | 16 | 5.2 | 9 | 8 |
HS-NO16-1 | 16 | 5.3 | 9 | 8 |
HS-NO18 | 18 | 6 | 12 | 10 |
HS-NO20 | 20 | 7.2 | 16 | 12 |
HS-NO20-1 | 20.2 | 6 | 15 | 12 |
HS-NO22 | 22 | 6.9 | 20 | 18 |
HS-NO25 | 25 | 7.7 | 26 | 22 |
HS-NO25-1 | 25 | 6.9 | 27 | 22 |
HS-NO28 | 28 | 6.4 | 31 | 26 |
HS-NO30 | 30 | 6.4 | 35 | 29 |
HS-NO32 | 32 | 7.8 | 43 | 34 |
HS-NO32-1 | 32 | 6.8 | 43 | 34 |
HS-NO34 | 34 | 7.3 | 50 | 37 |
HS-NO36 | 36 | 7.6 | 54 | 41 |
HS-NO36-1 | 36 | 6.9 | 55 | 41 |
HS-NO38 | 38 | 7.4 | 65 | 46 |
HS-NO40 | 40 | 7.9 | 75 | 51 |
HS-NO42 | 42 | 8.8 | 83 | 68 |
HS-NO42-1 | 42 | 7.9 | 83 | 68 |
HS-NO45 | 45 | 8.7 | 103 | 75 |
HS-NO48 | 48 | 10.8 | 130 | 81 |
HS-NO48-1 | 48 | 9.6 | 126 | 81 |
HS-NO50 | 50 | 10.7 | 151 | 91 |
HS-NO55 | 55 | 12 | 209 | 102 |
HS-NO60 | 60 | 15 | 256 | 120 |
HS-NO60-1 | 60 | 13.9 | 282 | 120 |
HS-NO65 | 65 | 14.9 | 362 | 137 |
HS-NO70 | 70 | 16.9 | 467 | 153 |
HS-NO75 | 75 | 17.8 | 510 | 178 |
HS-NO75-1 | 75 | 17.9 | 564 | 178 |
HS-NO80 | 80 | 19 | 681 | 200 |
* The holding forces have been determined on a polished plate made of steel (S235JR according to DIN 10 025) with a thickness of 10 mm by pulling the magnet vertically from the surface (1kg≈10N). A deviation of -10 % (max.) in the stated values is possible in exceptional cases. In general, the value will be exceeded. Small cracks in the magnetic material do not affect the holding force.
Pot Magnets and Mounting Magnets Applications For small applications and high holding requirements