Product Description

Small Cylindrical Hole Ferrite Pot Magnet Ø 10 x 4.5 mm, Round Base Ceramic Pot Magnet with Cylindrical Hole, Cylindrical Borehole Holding Magnets, Ferrite Shallow Magnets in Steelpot China Supplier

Small Cylindrical Hole Ferrite Pot Magnet Ø 10 x 4.5 mm Part No.HS-CH-10 by HSMAG Features :

Material: Housing steel and Magnetic core hard sintered ferrite disc permanent magnet.
Version: Housing, galvanized. Magnet, Ni coated or Zn coated
Note: Shallow pot magnets, These magnets are pressed or glued into the receiving holes.
Hairline cracks in the magnetic material are unavoidable for technical reasons in the D=10 mm version. They do not impair the attracting function of the magnets in any way.
Temperature range: max. 200°C.

Pot or Cap Magnets substantially increase the holding ability of disc and ring magnets that are fixed permanently and located in the centre of the steel pot or cap. The lower side of the magnet is in direct contact with bottom of the pot and the top side of the magnet is fractionally lower than the top edges of the pot. The outside diameter of the magnet less than the inside diameter of the pot, leaving a 2-4 mm spacing around the magnet which is generally filled with resin. A very strong locking field exists around the perimeter of the pot between the top of the magnet and the pot top edge returning the reverse side field. Alternative mounting options are available as shown in the photos.

Pot magnet is one of the most efficient designs for gripping and holding. It consists of magnet material enclosed in a metal pot, while the active magnet face is not enclosed.
Pot magnet, is widely used as tools for various activities in workshops and developed for the current industrial needs, such as Positioning jigs, Work holding fixtures, Catches and latches, Insert into jigs and fixtures for holding, etc.

The Ferrite Pot Magnets are usually used in these fields:
Hanging signs and lights
Fastening antennas
Holding tarps
Making retrieval tools
Holding through non-ferrous materials
Use for fastening or holding steel doors
Insertion into molds
Insertion into fixtures
Incorporation into precision finished products

Flat Magnetic Lenses Ø 30 X 6.4 mm

Countersunk Ceramic Round Base Magnet Ø 40 x 8 mm