Magnetisation Grade: N35
Magnet Material: Neodymium-Iron-Boron (NdFeB, Neo)
Magnet ID: RMS-ET-12-N35
Plating / Coating: Rubber or Plastic Jacket
Shape: Magnetic systems with External Thread
Magnetic systems Magnet Size:
Total weight 4.5 g
Total height H 15.5 mm
Total diameter D 12 mm
Pot height h1 7.5 mm
Thread standard m M4
Thread length h6 8 mm
Tolerance: ±0.05 mm
Magnetisation Direction: Axial / Diametrical
Residual Magnetic Flux Density (Br): 1170-1220 mT (11.7-12.2 kGs)
Energy Density (BH)max: 263-287 KJ/m³ (33-36 MGOe)
Coercivity Force (Hcb): ≥ 868 kA/m ( ≥ 10.9 kOe)
Intrinsic Coercivity Force (Hcj): ≥ 955 kA/m ( ≥ 12 kOe)
Maximum Operation Temperature: 80 °C
Delivery Time: 14-35 days
Rubber Coated External Screw Thread Magnet Ø 12mm
Product Description
Rubber Coated External Screw Thread Magnet Ø 12mm, Magnet Cup Assemblies, Magnetic System with External Thread, Neodymium Magnetic Systems with External Screw Thread China Supplier
Rubber Coated External Screw Thread Magnet Ø 12mm Part No. RMS-ET-12-N35 by HSMAG Features :
Material: Rubber or Plastic Coating, Housing steel and Magnetic core hard sintered neodymium permanent magnet with external screw thread.
Version: Housing, galvanized. Magnet, Ni coated or Zn coated
Note: Shallow pot magnets, These magnets are pressed or glued into the receiving holes.
Hairline cracks in the magnetic material are unavoidable for technical reasons in the D=12 mm version. They do not impair the attracting function of the magnets in any way.
Temperature range: max. 80°C.
Rubber Coated Magnet Cup Assemblies
Rubber coated magnetic holding base
Rubber covered magnet holder
Rubber Coated Magnet Cup Assemblies
Rubber Coated Magnet Cup Assemblies are specially used in the places where people don’t want magnet holders scratch steel surfaces or paint coating.
We have in stock for customer immediate needs. Besides, we can make other sizes to custom designs.
Max pull is tested on a ½” thick and flat machined steel plate. The actual pull should be smaller if your steel is thinner, rough, rusty, coated or not very flat. For any critical applications, three-time safety factor is strongly recommended.
* We will reply your mail within 24 hours and offer the price within short time.
* Samples are always available.
* Suppose you sent any your samples to us, we will do make it as per your sample quality.
* Welcome your magnet and magnetic assemblies inquires.
* Welcome your visiting our factory.
Following are necessary details for a good quotation:
1. The detailed Product Size;
2. Information of inner magnet;
3. Outer coating demand;
4. Attached drawing if customized;
5. Any special packing or other requirements.
| Part No. | Dimension (mm) | Thread | Weight | Holding Force | |||
| D | H | h1 | h6 | m | (g) | (Kg) | |
| RMS-ET-12 | 12 | 15.5 | 7.5 | 8 | M4 | 4.5 | 1.3 |
| RMS-ET-22 | 22 | 12.5 | 6 | 6.5 | M4 | 11 | 5.8 |
| RMS-ET-31 | 31 | 15.5 | 6 | 9.5 | M4 | 25 | 7.3 |
| RMS-ET-43 | 43 | 21 | 6 | 15 | M6 | 32 | 10 |
| RMS-ET-66 | 66 | 23.5 | 8.5 | 15 | M8 | 107 | 25 |
| RMS-ET-88 | 88 | 23.5 | 8.5 | 5.5 | M8 | 193 | 55 |
High quality pot/cup magnet assemblies made with super strong rare earth neodymium magnets and ceramic magnets for Home or Industrial uses.
