Product Description

Internal Threaded Mounting Magnet Ø48 mm, Threaded Bushing Neodymium Pot Magnet, Neodymium Shallow Pot Magnet, Clamping Pot Magnets with Internal Threaded Stem China Supplier

Internal Threaded Mounting Magnet Ø48 mm X 24 mm Part No.HS-ND48 by HSMAG Features :

Material: Housing steel and Magnetic core sintered neodymium magnet with internal thread .
Version: Housing, galvanized. Magnet, Ni coated or Zn coated
Note: Shallow pot magnets with Internal Threaded Stud. These magnets are pressed or glued into the receiving holes.
Hairline cracks in the magnetic material are unavoidable for technical reasons in the D=48 mm version. They do not impair the attracting function of the magnets in any way.
Temperature range: max. 80°C.

Holding Interior Thread Pot Magnet
A HSMAG magnets is sole provider of pot magnets that are internally threaded stud popularly known as Internal Threaded Stud. These magnets have a very large force, which can clamp down the ferromagnetic material because of its Ni or Zinc plated mild steel. Thus, allow a magnetic circuit with improved material, which can achieved with minimal sizes.
Pot Magnets with internal thread stud/Boss mounting have that thick steel backing with female thread section. With help of threads like M4 and M10 screw and a bolt, these magnets have a platform, which can hold the pot magnets with much efficient internal thread with Stud/Boss mounting on the place.

Female Threaded Shallow Pot Magnet Ø42 mm

Interior Thread Pot Magnet Ø40 mm

Shallow Pot Magnet
Introduction
1, Shallow pot magnets are low profile for applications where height is limited.
2, They have a clearance hole through and a countersunk on the magnetic face to accept a countersunk screw.
3, The range of Shallow Pot Magnets is wide and shallow, the north and south poles are on the same plane.
4, Because the gap between the poles is narrow, they have a shallow flux field, these magnets are ideal for limpet type gripping applications.
5, Each magnet in the range is manufactured with a standard M6 thread for building into jigs and fixtures, fitted with a J bolt.
6, Surface can be red painted, or coated with nickel, zinc or Chrome. Disc holding magnets can be fixed onto or sunken into steel surfaces without any loss of performance.
Features:
Ideal for limpet type gripping applications, as bases to machine tool accessories and industrial light fittings
Permits used in confined places
Standard M6 thread
Features mark diameter clearance holes for fastening with rods or bolts
Materials: Ceramic Ferrite, AlNiCo, NdFeB or SmCo are available