Product Description

Holding Permanent Magnet Ø 48 X 9.6 mm, Through Hole Neodymium Mounting Magnet, Zinc Plated NdFeB Holding Magnet with Cylindrical Hole, Shallow Pot Magnets Supplier

Holding Permanent Magnet Ø 48 X 9.6 mm Part No.HS-NB48-1 by HSMAG Features :

Material: Housing steel and Magnetic core sintered neodymium ring magnet.
Version: Housing, galvanized. Magnet, Ni coated or Zn coated
Note: Shallow flat pot magnets with cylindrical hole. These magnets are pressed or glued into the receiving holes.
Hairline cracks in the magnetic material are unavoidable for technical reasons in the D=48 version. They do not impair the attracting function of the magnets in any way.
Temperature range: max. 80°C.

SHALLOW POT MAGNETS
Rare Earth Pot Magnets are extremely useful for holding, actuating, pulling, hanging, locating, separating, retrieving…the list never ends!
SOME OF THE MANY USES FOR RE60 POT MAGNETS INCLUDE:
Holding temporary safety or advisory flags on railways and industrial sites
Concreting applications where reo off-cuts need removing before a slab is poured
Keeping doors open or closed
Document holding on office or factory walls
Switch actuation
Cable hanging
Stringline tie downs on building sites
Sign holdings

A Series – Countersunk centre hole
B Series – Straight hole
C Series – Male thread
D Series – Female threaded boss
E Series – Complete with hook

Special feature: these magnets can be fixed or mounted using screws. For this reason we suggest to place and glue them in a drilled pilot hole and can be used at a temperature up to 80°C / 100°C.

NEODYMIUM-IRON-BORON COUNTERBORE POT MAGNET Ø 48 X 9.6 MM

NEODYMIUM-IRON-BORON POT MAGNET W/ BORE Ø 50 X 10.7 MM