Product Description

Hard Sintered Ceramic Countersunk Cup Magnet Ø 50 x 10 mm, Round Base Countersunk Pot Magnet, Mounting Magnets, Countersunk Ferrite Shallow Magnets in Steelpot China Supplier

Hard Sintered Ceramic Countersunk Cup Magnet Ø 50 x 10 mm Part No.HS-CO-50 by HSMAG Features :

Material: Housing steel and Magnetic core hard sintered ferrite disc permanent magnet.
Version: Housing, galvanized. Magnet, Ni coated or Zn coated
Note: Shallow pot magnets, These magnets are pressed or glued into the receiving holes.
Hairline cracks in the magnetic material are unavoidable for technical reasons in the D=50 mm version. They do not impair the attracting function of the magnets in any way.
Temperature range: max. 200°C.

Pot or Cap Magnets substantially increase the holding ability of disc and ring magnets that are fixed permanently and located in the centre of the steel pot or cap. The lower side of the magnet is in direct contact with bottom of the pot and the top side of the magnet is fractionally lower than the top edges of the pot. The outside diameter of the magnet less than the inside diameter of the pot, leaving a 2-4 mm spacing around the magnet which is generally filled with resin. A very strong locking field exists around the perimeter of the pot between the top of the magnet and the pot top edge returning the reverse side field. Alternative mounting options are available as shown in the photos.

Round Bases – Steel design with ceramic magnets for positioning or holding signs, fixtures and decorations. Chrome plated. Round Bases can be also painted in three different colours: black lacquer, yellow & white – special order only. If you need assistance with your requirements, please contact us.
Pot magnets are strong magnets which can produce a magnetic field on its exclusive surface. These magnets are known for their strength and durability and are available in different sizes and shapes.

Flat Magnetic Lenses Ø 30 X 6.4 mm

Countersunk Ceramic Round Base Magnet Ø 40 x 8 mm