Product Description

6mm Deep Pot Alnico Cylinder Magnet w/ Internal Stem, Female Thread Alnico Pot Magnet, Zinc Plating Internal Thread Deep Pot Alnico Holding Sytem, Alnico Cylinder Magnet Assemblies, Threaded Stem Deep Cylindrical Pot Magnet China Supplier

6mm Deep Pot Alnico Cylinder Magnet w/ Internal Stem Part No. ADPIT-0620 by HSMAG Features :
This Alnico Deep Pot Magnet has a diameter of 6 mm and a height of 20 mm.
Material: Circular rods made of precision-cast AINiCo 500 and steel body
Plating:  galvanized
Shape: Bar / Rod  with Internal Thread
Tolerance: D ±0.1 mm / H ±0.2 mm
450° maximum operating temperature
Alnico 5 magnet material and mild steel pot
Good corrosion resistance

AlNiCo magnets have a high remanence, but a fairly low coercivity. This means the AlNiCo magnetic material has a high flux density which, however, is only hardly present in the magnet and can easily be weakened by demagnetising influences. For this reasons AINiCo rod magnets should not be stored or used with equal poles opposing each other (repelling).
In temperatures ranging from – 270 °C up to + 400 °C AINiCo is very stable. Its temperature coefficient is as low as – 0.02% per degree C.
A high nickel content of the alloy results in good stability against most acids and against oxidation.

Details of Alnico Deep Pot Magnets (Zinc Plated)

Pot Magnets are Magnetic Holding Assemblies for use where a very strong surface holding magnet is required. The magnet sits inside a steel case which provides extra strong magnetism on one face only, provides a hole for fixing and also protects the magnet from damage.
One of the largest usages of magnets is the application of holding or gripping, the basic principle of the holding or pot magnet is to direct and concentrate the flux from both magnetic poles to one active face. This is usually achieved with steel pole pieces or a steel-backing cup.

10mm Deep Pot Threaded Stem Alnico Magnet

20mm Inner Thread Alnico Bar Holding Magnet