Bar Rod magnets AlNiCo, Deep Pot Holding, steel body, zinc coated AlNiCo-Rod magnet,metal body Ø 63×65 mm
Magnet ID: ADP-6365
Material: Circular rods made of precision-cast AINiCo 500
Plating / Coating: zinc coated
Shape: Bar / Rod
Tolerance: D ±0.1 mm / H ±0.2 mm
Magnetisation Direction: anisotrop
Maximum Operation Temperature: 450 °C
Delivery Time: 14-35 days
Article number D mm H mm A¹ mm Force* N Weight g Temperature °C
ADP-6365 63(+0.1/-0.1) 65(+0.2/-0.2) 10 660 1306 450
Measurements:
63mm Huge Zinc Coated Deep Pot Holding Magnets
Product Description
63mm Huge Zinc Coated Deep Pot Holding Magnets, Aluminum Nickel Cobalt Deep Pots with max. 450 ° C, Waterproof Alnico Deep Pot Holding Magnet, Alnico Magnetic Assemblies, Flat Alnico Cylindrical Magnet, Alnico Deep Holding Systems China Supplier
63mm Huge Zinc Coated Deep Pot Holding Magnets Part No. ADP-6365 by HSMAG Features :
This Alnico Deep Pot Magnet has a diameter of 63 mm and a height of 65 mm.
Material: Circular rods made of precision-cast AINiCo 500 and steel body
Plating: Nickel / Galvanized / Zinc
Shape: Bar / Rod with Fitting Tolerance h6
Tolerance: D ±0.1 mm / H ±0.2 mm
450° maximum operating temperature
Alnico 5 magnet material and mild steel pot
Good corrosion resistance
POT Magnets with Alnico Core
POT magnets are made up of Alnico core and screened by a non-magnetic ring. They are inserted into a chrome coated iron housing which ensures shock-resistance. The hole facing the attractive surface allows the fixing of the piece.
This range of magnets is known as the best solution to various problems concerning working conditions in small areas. Moreover, they are resistant to working temperatures up to 450°C.
Deep pot holding magnets (waterproof)
with waterproof surface made from stainless steel, seawater resistant, pressurised-water-tight, usable in food areas order listStrong holding force by component parts with high-energy magnets (NdFeB), non-demagnetisable, no attenuation of the holding force. Operating temperature of – 40 °C to + 110 °C. Only slight loss of holding force due to air gap between holding area and magnet.
Can also be used as a catching element for iron and steel parts. General diameter tolerance h9, with fixing thread at the rear end.
Option 1: An operation temperature up to + 200 °C is possible using Magnet.
Option 2: Two magnets, with a counterpole mounting of the magnets in a stainless steel cover the two magnetic surfaces opposite each other are attracted strongly to each other.The construction of watertight end face coupling is also possible.
Small Alnico Deep Pot Magnet with metal pot and fitting tolerance h6
Alnico Pot Magnets APPLICATIONS
Can be used in jigs and fixtures.
Can hold work-pieces during wire cutting.
Can be incorporated in press dies.
