Bar Rod magnets AlNiCo, Deep Pot Holding, steel body with Threaded Stem, Female Thread, zinc coated, Rod magnet AlNiCo (Aluminum Nickel Cobalt) with metal pot and internal thread.
Magnet ID: ADPIT-3240
Material: Circular rods made of precision-cast AINiCo 500 and steel body
Plating / Coating: zinc
Shape: Bar / Rod
Tolerance: D ±0.1 mm / H ±0.2 mm
Magnetisation Direction: anisotrop
Maximum Operation Temperature: 450 °C
Delivery Time: 14-35 days
Article number D mm H mm Thread MxL Force* N Weight g Temperature °C
ADPIT-3240 32(+0.1/-0.1) 40(+0.2/-0.2) M8x9 160 220 450
Measurements:
32mm Internal Thread Alnico Bar Magnet
Product Description
32mm Internal Thread Alnico Bar Magnet, Zinc Plating Internal Thread Deep Pot Alnico Bar Holding Magnet, Alnico Cylindrical Magnet Assemblies, Deep Cylindrical Pot Magnet with Female Thread China Supplier
32mm Internal Thread Alnico Bar Magnet Part No. ADPIT-3240 by HSMAG Features :
This Alnico Deep Pot Magnet has a diameter of 32mm and a height of 40 mm.
Material: Circular rods made of precision-cast AINiCo 500 and steel body
Plating: galvanized
Shape: Bar / Rod with Internal Thread
Tolerance: D ±0.1 mm / H ±0.2 mm
450° maximum operating temperature
Alnico 5 magnet material and mild steel pot
Good corrosion resistance
Grades
Different material grades provide price/performance options. The chart to the right provides summary information; contact us for detailed Technical Information.
AlNiCo magnets have a high remanence, but a fairly low coercivity. This means the AlNiCo magnetic material has a high flux density which, however, is only hardly present in the magnet and can easily be weakened by demagnetising influences. For this reasons AINiCo rod magnets should not be stored or used with equal poles opposing each other (repelling).
In temperatures ranging from – 270 °C up to + 400 °C AINiCo is very stable. Its temperature coefficient is as low as – 0.02% per degree C.
A high nickel content of the alloy results in good stability against most acids and against oxidation.
Details of Alnico Deep Pot Magnets (Zinc Plated)
The Alnico deep pot magnet is a deep pot magnet ideal for use in the highest temperature applications. The zinc plated mild steel body combined with the alnico’s natural good corrosion resistance provides the alnico deep pot magnet with good overall corrosion resistance and excellent magnetic performance with most oils.
The design includes a brass spacer between the zinc plated mild steel and the Alnico 5 magnet to retain the alnico magnet in position. The pole face, where the clamping occurs, is ground to a smooth finish. The rear of the alnico deep pot magnet is blind ended (no thread or tapped hole).
Alnico Pot Magnets APPLICATIONS
Can be used in jigs and fixtures.
Can hold work-pieces during wire cutting.
Can be incorporated in press dies.
