Bar Rod magnets AlNiCo, Deep Pot Holding, steel body with Threaded Neck, Male Thread, galvanized, Rod magnet AlNiCo (Aluminum Nickel Cobalt) with metal pot and external thread.
Magnet ID: ADPET-1620
Material: Circular rods made of precision-cast AINiCo 500 and steel body
Plating / Coating: galvanized
Shape: Bar / Rod with External Thread
Tolerance: D ±0.1 mm / H ±0.2 mm
Magnetisation Direction: anisotrop
Maximum Operation Temperature: 450 °C
Delivery Time: 14-35 days
Article number D mm H mm Thread MxL Force* N Weight g Temperature °C
ADPET-1620 16(+0.1/-0.1) 20(+0.2/-0.2) M4x10 20 31 450
Measurements:
16mm Galvanized Alnico Pot Magnet with Threaded Neck
Product Description
16mm Galvanized Alnico Pot Magnet with Threaded Neck, External Thread Alnico Cylindrical Magnet Assemblies, Deep Cylindrical Pot Magnet with External Thread, Cylinder Magnet Assemblies, Alnico Bars China Supplier
16mm Galvanized Alnico Pot Magnet with Threaded Neck Part No. ADPET-1620 by HSMAG Features :
This Alnico Deep Pot Magnet has a diameter of 16mm and a height of 20mm.
Material: Circular rods made of precision-cast AINiCo 500 and steel body
Plating: galvanized
Shape: Bar / Rod with External Thread
Tolerance: D ±0.1 mm / H ±0.2 mm
450° maximum operating temperature
Alnico 5 magnet material and mild steel pot
Good corrosion resistance
Types
Based on the designs and applications alnico pot magnets are ctegorized into following types: •Alnico Deep Pot Magnet
• Alnico Shallow Pot Magnet
• Alnico Magnetic Holdfast
• Alnico Magnetic Foot
Alnico Deep Pot Magnet
Alnico pot magnet is a deep cylindrical permanent magnet which are assembled in a mild steel pot using spacers like Aluminum or Copper. The working temperature of this magnet is around 250° C. Outer surface except pole can be either painted or coated with Zinc, Nickel or Chrome. Assembly of the magnet and correct spacing are achieved by the use force-fitted aluminium ring . While working above 200°C, precaution must be taken of possible mechanical loosening through expansion and contraction of the component parts.
Heat is another strength for alnico magnets.
Their maximum working temperature is 540 degrees C (1004 degrees F).
The Curie Temperature for alnico magnets is a blistering 860C (1580F).
Hot temperatures are not going to affect these magnets much!
Details of Alnico Deep Pot Magnets (Zinc Plated)
The Alnico deep pot magnet is a deep pot magnet ideal for use in the highest temperature applications. The zinc plated mild steel body combined with the alnico’s natural good corrosion resistance provides the alnico deep pot magnet with good overall corrosion resistance and excellent magnetic performance with most oils.
The design includes a brass spacer between the zinc plated mild steel and the Alnico 5 magnet to retain the alnico magnet in position. The pole face, where the clamping occurs, is ground to a smooth finish. The rear of the alnico deep pot magnet is blind ended (no thread or tapped hole).
Alnico Pot Magnets APPLICATIONS
Can be used in jigs and fixtures.
Can hold work-pieces during wire cutting.
Can be incorporated in press dies.
