Neodymium Hook Magnets

Neodymium Hook Magnets, Magnetic Hooks, Pot Magnets with Hook, NdFeB Hook Magnets, Mounting Magnets, Holding Magnet, Rare Earth Magnetic Hook Assemblies

Our strong neodymium hook magnets could be even stronger! In this category you find our neodymium pot magnets. The core is a strong neodymium disc built in a steel pot. Not only will the steel pot keep the magnet safe from damages but also the magnetic force is higher! Because of the steel there is only one side that can be attached. The optimal surfaces are steel and iron. If you need less force and adherence you should have a look at our ferrite pot magnets.

Special features: Our tapped hooks are placed in a pot magnet with tapped / threaded bushing. They can be used at a temperature up to 80 °C. These magnets are the perfect helper for exhibitions and displays. Even in advertising / display design / lighting sector, our strong pot magnets are indispensable. If you need eyelets (closed hooks / rings) you can find them in this category.

Neodymium Hook Magnets or Ndfeb Hook Magnets by HSMAG – Our strong flat neodymium pot magnets with hook could be even stronger! In this category you find our neo hook magnets. The holding core is a strong disc ndfeb magnet with a hook (Powerful rare earth neodymium permanent magnet) built in a steel pot. Not only will the steel pot keep the magnet safe from damages but also the magnetic force is higher! Because of the steel there is only one side that can be attached. The optimal surfaces are steel and iron. These magnets dimension is D 6 mm to 80 mm dia, the H is 4.7 mm to 19 mm. These magnetic pots stem is M3 to M10 and The pot coating is Ni-Cu-Ni plating, Zn-plated or Chrome-coated for a durable, quality finish. We offer an extensive holding force range of magnetic lenses with hook is lifting up 0.5 kg to lifting up 200 kg, it is super strong powerful for mounting and holding. These are the ideal magnets for when intense holding power is required.

Special feature: these magnets can be fixed or mounted using nuts. For this reason we suggest to place and glue them in a drilled pilot hole and can be used at a temperature up to 80°C / 100°C.