Ferrite Flat Pot Magnets

Ferrite Flat Pot Magnets, Magnetic System, Ceramic Mounting Magnets, Flat Cup Magnets, Ferrite Magnetic Pots Assemblies, Holding Magnet, Magnetic Lens, Flat Pot Magnets with Ferrite Magnets, Fastening Magnet

Our strong Ferrite Flat Pot Magnets could be even stronger! These are our models of ferrite pot magnets. The core is a strong samarium disc built in a steel pot. Not only will the steel pot keep the magnet safe from damages but also the magnetic force is higher! Because of the steel there is only one side that can be attached. The optimal surfaces are steel and iron. If you search for really strong magnets in steel pot we suggest our neodymium magnets.

Special feature: these magnets can not be fixed or mounted using screws. For this reason we suggest to place and glue them in a drilled pilot hole and can be used at a temperature up to 200 °C.

These ceramic magnets dimension is D 10mm to 80mm dia, the H is 4.5mm to 18mm. These flat pots weight is 400g to 6000g and  The pot coating is Ni-Cu-Ni plating, Zn-plated or Chrome-coated for a durable, quality finish. We offer an extensive holding force range of magnetic lenses is lifting up 0.4kg to lifting up 60kg, it is very strong for mounting and holding.

They are ferrite and not neodymium magnets like the otherwise identical countersunk pot magnets. They have therefore a lower adhesive force and are larger. But they are cheaper than neodymium magnets and can be used outside as well. We also carry screw-on neodymium magnets without pot. These are the ideal magnets for when intense holding power is required.

If you need more pull force and adherence you should have a look at our neodymium pot magnets.