Countersunk Neodymium Pot Magnets

Countersunk Neodymium Pot Magnets, Neodymium Countersunk Pot Magnets, Countersunk NdFeB Mounting Magnets, Cup Magnets with Countersink Hole, Magnetic Pots Assemblies, Countersunk Holding Magnet, Magnetic Lenses

Countersunk Neodymium Pot Magnets by HSMAG – Our strong ring neodymium magnets with sunken hole could be even stronger! In this category you find our countersunk neodymium pot magnets. The holding core is a strong ndfeb magnet with 90° countersunk hole (Powerful rare earth neodymium permanent magnet) built in a steel pot. Not only will the steel pot keep the magnet safe from damages but also the magnetic force is higher! Because of the steel there is only one side that can be attached. The optimal surfaces are steel and iron. These magnets dimension is D 10mm to 80mm dia, the H is 4.5mm to 10.5mm. These magnetic pots weight is 3g to 655g and The pot coating is Ni-Cu-Ni plating, Zn-plated or Chrome-coated for a durable, quality finish. We offer an extensive holding force range of magnetic lenses with countersink hole is lifting up 1kg to lifting up 192kg, it is super strong powerful for mounting and holding. These are the ideal magnets for when intense holding power is required.

Special feature: these magnets can be fixed or mounted using screws. For this reason we suggest to place and glue them in a drilled pilot hole and can be used at a temperature up to 80°C / 100°C.

If you need less force and adherence you should have a look at our ferrite pot magnets.