Countersunk Ferrite Pot Magnets

Countersunk Ferrite Pot Magnets, Magnetic System, Ceramic Pot Magnets with Countersunk Hole, Countersunk Cup Magnets, Ferrite Magnetic Pots Holding Assemblies, Countersink Pot Magnets, Fastening Mounting Magnet

Our strong Countersunk Ferrite Pot Magnets could be even stronger! These are our models of ferrite pot magnets. The core is a strong samarium disc built in a steel pot. Not only will the steel pot keep the magnet safe from damages but also the magnetic force is higher! Because of the steel there is only one side that can be attached. The optimal surfaces are steel and iron. If you search for really strong magnets in steel pot we suggest our neodymium magnets.

Special feature: these magnets can not be fixed or mounted using screws. For this reason we suggest to place and glue them in a drilled pilot hole and can be used at a temperature up to 200 °C.

These ceramic countersunk pot magnets dimension is D 16mm to 63mm dia, the H is 4.5mm to 14mm. These flat pots weight is 600g to 5000g and  The pot coating is Ni-Cu-Ni plating, Zn-plated or Chrome-coated for a durable, quality finish. We offer an extensive holding force range of magnetic lenses is lifting up 1.8kg to lifting up 29kg, it is very strong for mounting and holding.

They are ferrite and not neodymium magnets like the otherwise identical countersunk pot magnets. They have therefore a lower adhesive force and are larger. But they are cheaper than neodymium magnets and can be used outside as well. We also carry screw-on neodymium magnets without pot. These are the ideal magnets for when intense holding power is required.

If you need more pull force and adherence you should have a look at our neodymium pot magnets.