Rubber Magnet Sheet, Flexible Magnetic Sheeting is produced with calendering process. It is normally used in office appliance, advertising, checking and testing meters etc. According to its magnetization method, it is divided into penetration magnetization and surface magnetization.(pole width 2,4,7mm or 12,7/6.4/3.6 poles per inch).
As with all magnetic materials ,performance is difficult to quantify without going into complex formula. We strive in this section to give rules of thumb and an appreciation of different materials which will help in the selection of magnets. Hands-on testing is definitely recommended(with papers/air gaps as necessary) to select the best magnet for the job.
rubber-magnet-sheet
Material Types of rubber magnet sheet
Material | Max. Energy Product |
a. Isotropic/semi Anisotropic Ferrite | 0.7-0.8MGOe |
b. Full Anisotropic Ferrite( High Energy Sheet) | 1.1-1.4MGOe |
c. Neodymium Flexible Material | 2.0-2.5MGOe |
Material Thickness of rubber magnet sheet
The popular thickness range of flexible magnet material is 0.4-1.5mm, but thicker material is available in high energy. The thicker the material the greater the pull. It is not in direct proportion, but the thicker the material the greater the pull increase. Eg:0.75mm thick material has a pull of 44 gram/cm2 and if proportional the 1.5mm thick material would be 88gram/cm2, but in fact it is actually far higher at 140 gram/cm2.
Typical Pull Characteristics:
Material Thickness(mm) | Pull (Gram/cm2) |
0.4 | 19 |
0.5 | 28 |
0.75 | 44 |
1.5 | 140 |
Magnetic properties of flexible magnetic sheeting
| Code | Br | Hcb | Hcj | (BH)max | Forming way | Size | ||
| T | KA/m | KA/m | KJ/m3 | Max Length(m) | Max Width(mm) | Height(mm) | ||
| HSRMS-1 | 0.13~0.18 | 80~120 | 100~160 | 4~6.4 | Calendering | 100 | 400 | 0.4~1.1 |
| HSRMS-2 | 0.18~0.22 | 100~140 | 120~190 | 6.4~8.0 | Calendering | 2 | 930 | 0.6~3 |
| HSRMS-3 | 0.21~0.239 | 140~165 | 150~210 | 8.0~10.4 | Calendering | 100 | 400 | 0.4~1.5 |
| HSRMS-4 | 0.24~0.265 | 15z`6~181 | 200~270 | 10.4~12.5 | Calendering | 2 | 400 | 0.6~6 |
Physical properties of flexible magnetic sheeting
Code | Tensile Strength (MPa) | Elongation Rate (%) | Hardness (SHA) | Temperature (oC) | Density (g/cm3) |
HSRMS-1 | 7~12 | 100~200 | 85~98 | -10~80 | 3.6~3.7 |
HSRMS-2 | 7~12 | 100~300 | 85~98 | -10~80 | 3.6~3.7 |
HSRMS-3 | 7~12 | 100~200 | 85~98 | -10~80 | 3.6~3.7 |
HSRMS-4 | 7~12 | 100~300 | 85~98 | -10~80 | 3.6~3.7 |
2100KGS Precast Concrete Formwork Button Magnet
1800KGS Formwork Precast Concrete Magnetic Boxes
1500KGS Formwork Construction Precast Concrete Magnets
1350KGS Precast Concrete Shuttering Magnet