Bar Rod magnets AlNiCo, Deep Pot Holding, steel body, zinc coated AlNiCo-Rod magnet,metal body Ø 08×12 mm
Magnet ID: ADP-0812
Material: Circular rods made of precision-cast AINiCo 500
Plating / Coating: zinc coated
Shape: Bar / Rod
Tolerance: ±0.1-0.2 mm
Magnetisation Direction: anisotrop
Maximum Operation Temperature: 450 °C
Delivery Time: 14-35 days
Article number D mm H mm A¹ mm Force* N Weight g Temperature °C
ADP-0812 8(+0.1/-0.1) 12(+0.2/-0.2) 3 4 4.5 450
Measurements:
8mm Small Bar Rod Magnets AlNiCo
Product Description
8mm Small Bar Rod Magnets AlNiCo, Alnico Flat Cylindrical Pot Magnet, Bi-pole Pot Magnet Alnico System, Flat Alnico Holding Deep Pots Mounting Magnet, Alnico Magnetic Assemblies, Flat Alnico Cup Permanent Magnet China Supplier
8mm Small Bar Rod Magnets AlNiCo Part No. ADP-0812 by HSMAG Features :
This Alnico Deep Pot Magnet has a diameter of 8 mm and a height of 12 mm.
Material: Circular rods made of precision-cast AINiCo 500 and steel body
Plating: Nickel / Galvanized / Zinc
Shape: Bar / Rod with Fitting Tolerance h6
Tolerance: D ±0.1 mm / H ±0.2 mm
450° maximum operating temperature
Alnico 5 magnet material and mild steel pot
Good corrosion resistance
Pot magnets are used in the area of gauge stands, lifting magnets, dial stands, work piece securing and jigs & fixtures. These pot magnets are industry standard in English-speaking countries, the installed alloy magnet is built in with an spacer collar made of aluminum in a soft iron pot. As a result, it keeps the holding force concentrated onto the holding area. While working above 200 °C, precaution must be taken of possible mechanical loosening through expansion and contraction of the component parts.
Magnetic pots, also called cup magnets or disc magnets, consist of a magnet encased in metal, with its active magnet face exposed. Magnetic pots may have a hole, thread or screw in the center. The metal encasing on a magnetic pot allows the opposing fields of the magnet to transfer back to its active face. This increases the intensity of the magnet’s pull strength to three to four times that of a standard magnet of the same size.
Standard Sintered Alnico has tighter dimensional tolerances due to its processing. It also has slightly lower magnetic properties, but better mechanical strength than Cast Alnico products. Alnico alloys, which possess the lowest reversible temperature coefficient magnetism in permanent magnet materials, have excellent working temperature up to 600℃. High Nickel content of Alnico alloy result in good stability against corrosion and oxidation, this metallic composition is also a good electrical conductor.
Alnico Pot Magnets APPLICATIONS
Can be used in jigs and fixtures.
Can hold work-pieces during wire cutting.
Can be incorporated in press dies.
