Product Description

13mm Deep Pot Alnico Holding System with Internal Thread, Female Thread Alnico Pot Magnet, Zinc Plating Internal Thread Deep Pot Alnico Holding Bar Magnet, Alnico Cylinder Magnet Assemblies, Deep Cylindrical Pot Magnet China Supplier

13mm Deep Pot Alnico Holding System with Internal Thread Part No. ADPIT-1320 by HSMAG Features :
This Alnico Deep Pot Magnet has a diameter of 13 mm and a height of 20 mm.
Material: Circular rods made of precision-cast AINiCo 500 and steel body
Plating:  galvanized
Shape: Bar / Rod  with Internal Thread
Tolerance: D ±0.1 mm / H ±0.2 mm
450° maximum operating temperature
Alnico 5 magnet material and mild steel pot
Good corrosion resistance

AlNiCo magnets have a high remanence, but a fairly low coercivity. This means the AlNiCo magnetic material has a high flux density which, however, is only hardly present in the magnet and can easily be weakened by demagnetising influences. For this reasons AINiCo rod magnets should not be stored or used with equal poles opposing each other (repelling).
In temperatures ranging from – 270 °C up to + 400 °C AINiCo is very stable. Its temperature coefficient is as low as – 0.02% per degree C.
A high nickel content of the alloy results in good stability against most acids and against oxidation.

Details of Alnico Deep Pot Magnets (Zinc Plated)

Bar Rod magnets – Pot holding magnets
These pot magnets are industry standard in all English-speaking countries where they are referred to as “deep pot magnets”.
The installed alloy magnet ALCOMAX is built in with an spacer collar made of aluminium in a soft iron pot. As a result the holding force is concentrated onto the holding area. All pot magnets have an inner thread M6 at the top.
Max. operating temperature: + 200 °C
Surface: lacquered.
All dimensions in mm.

Zinc Coated AlNiCo Pot Magnet w/ Internal Thread

16mm Alnico Deep Cylindrical Pot Magnet w/ Internal Thread